EasyRoll × Home Assistant Integration Guide
Connecting your EasyRoll Smart Blind to Home Assistant lets you control it directly at home without the cloud, and use it in HA automations (sunrise/sunset, temperature triggers, etc.). We recommend the Hybrid setup — keep the EasyRoll app and connect HA in addition: even if the internet goes down, HA can still control it locally, and even if HA is off you keep control via the app as long as the internet is connected.
Contents
| Step | Description |
|---|---|
| 1. Getting Started · Requirements | Integration method · Mosquitto broker |
| 2. Connecting the Device | ① From the app (Hybrid) ★Recommended · ② Device setup page by typing the IP |
| 3. Using It in HA | Cards · position slider · automation YAML examples |
| 4. Advanced Commands | Direct MQTT control |
| Move / Remove Device | Deleting in the app cleans up HA automatically · HA-only: EZS_HARESET$ |
| 5. Troubleshooting | Connection failures · behavior when the broker is down |
Quick Start
- Install the Mosquitto broker add-on in HA → check the requirements
- Register the device with the EasyRoll app (skip if already in use) → Register Device
- In the app, tap ⚙ next to the zone name → [Zone device settings] → [Home Assistant] → select devices + enter the broker info → [Connect] → details
- It registers automatically in HA — use both the app and HA right away!
Highlights
- Local connection — works at home even when the internet is down
- Automatic registration (MQTT Discovery) — no manual YAML required
- Automatic online/offline status
- App + HA at the same time (Hybrid) — control from both the EasyRoll app and HA simultaneously. Even if the internet goes down, HA can still control it locally, and even if HA is off you keep control via the app as long as the internet is connected. (Firmware V3.2.0 or later)
For general usage, see the User Manual.